Just In for Jeep Wrangler’s!!!!
Splash-Proof and Dust-Proof!!!
The new Alpine Electronics of America 9-Inch touchscreen and dash kit are splash-proof and dust-proof, rated at IP53* so the adventure can go on uninterrupted.
Get your Alpine installed at Next Level Inc.
i109-WRA Unit
The colossal i109-WRA In-Dash Restyle System with Apple CarPlay brings you an innovative way to use your iPhone on the road in your 2011-Up Jeep Wrangler. Apple CarPlay gives iPhone users an incredibly intuitive way to make calls, use Maps, listen to music and access messages with just a word or a touch. When Apple CarPlay is used on the i109-WRA, users can control Apple CarPlay from the massive 9-inch touchscreen, custom designed hard keys on the dash kit or activate Siri for minimized distraction. Apple CarPlay uses a Lightning connector and is compatible with iPhone 5 and later, and iOS 7.1 and higher.
Before and After Installation
Installed at Next Level Inc., the unit comes ready with:
Apple CarPlay & Android Auto
Built-In GPS Voice Guided Navigation
DVD/CD Entertainment
For more information, call or stop in today!
407-704-5676
Is your truck lifted— making it hard to get into?
•
•
•
Do you struggle getting into the bed of your truck?
Then stop by Next Level to purchase your AMP Research BEDSTEP®
The BEDSTEP® is strong and rugged and will perform flawlessly in Florida mud and dirt.
BEDSTEP®
This non-slip, retractable bumper step quickly flips down with the nudge of a foot providing a faster, easier and safer way to load or unload your pickup’s cargo. It is frame-mounted under the rear bumper so it works even with an open tailgate or when towing.
BEDSTEP®
Precision, stainless steel hinge points and press-fit bushings ensure trouble-free action and reliable, maintenance-free operation for decades. Die-cast-aluminum alloy linkage components and precision-machined pivot points give BedStep® rock-solid stability, and the PTFE coating ensures years of trouble-free, corrosion-proof operation. The ridged, non-slip step is molded of strong glass-reinforced resin, for safe footing even in mud.
BEDSTEP®
- FRAME-MOUNTED TAILGATE ACCESS STEP
- ENGINEERED TO SUPPORT LOADS UP TO 300 LBS
- HIGH-STRENGTH ALUMINUM ALLOY COMPONENTS
- PRECISION STAINLESS-STEEL PIVOT PINS FOR ROCK-SOLID STABILITY
- MAINTENANCE-FREE, SELF LUBRICATING BUSHINGS FOR ALL-WEATHER PERFORMANCE
- MILITARY-SPEC, CORROSION-RESISTANT, ANODIZED AND PTFE COATED FINISH
- NON-SLIP, GLASS-REINFORCED COMPOSITE STEP PAD–BIG ENOUGH FOR TWO LARGE BOOTS
- EASY BOLT-ON INSTALLATION
BEDSTEP®
BEDSTEP® is made in the USA and backed by a 3-year/36,000-mile warranty.
Remember, all installations come with a lifetime warranty when you purchase products through our shop.
Stop in at Next Level to purchase yours and have it installed today!
87 W. Michigan St.
Orlando, Florida 32806
407-704-5676
A customer came to our custom shop with their H2 Hummer to have, basically a whole new interior, including painted door panels and trim pieces, new leather seats, tablet mounted headrests for the rear passengers, a radar detector, Garmin front facing camera, a new pioneer sound system, and a replacement of all front facing lights from Rigid Industries.
The family was so excited to see the final work done and delivered. They mentioned how the kids were going to be so excited for the removable tablet headrest, headphones, and gaming controller for the long family adventures in the SUV. They also mentioned how well the new leather seats looked with the newly painted interior panels like the dash, door handles and more.
-
- Custom Painted Dash, Doors and Custom Seats
-
- Custom Painted Dash, Painted Door Trims, and Custom Seats
-
- Custom Seats Installed
-
- Rear Custom Seats Installed and Gaming Controller
-
- Custom Painted Center Console
-
- Valentine One and Garmin Unit Installed
-
- Easy to Remove from Headrest and Secure Lock when Charging
-
- Quiet Car Rides with the Family
Rigid Industries Lights
From the front of the truck, we replaced all headlights and fog lights as well as added 2 more additional Rigid Industries lights on the front grill guard. The new light kit makes for better driving at night and are stronger, more reliable than the stock lights.
Pictured Above R-Series 46 – The all-new R-Series 46 Light Kit raises the bar for Rigid Industries as its first circular light with all the superior output and technology Rigid is known for. This adaptive crossover sets itself apart from the rest with its curved lens, curved housing, compact design, optics and advanced heat sink. The R-Series 46 works perfectly as a spotlight, in a fog light position, or wherever you need extreme light output. Available in Spot, Hyperspot, Flood, Combo, Driving and Wide beam patterns, the R-Series 46 is the total lighting solution.
-
- Truck-Lite® Headlight Kits
-
- R2-46 Hypersport
-
- R2-46 Flood Light
-
- Full Replacement of Front Lights
Pictured above: Truck-Lite® Headlight Kits by Rigid Industries- are an excellent option for light, medium and heavy-duty trucks, off-road vehicles, classic cars, motorcycles and more. Metalized reflector optics provide a lighting experience that is smooth and clean across the driving surface. LED headlights provide a brighter, crisper and whiter light output, closer to the color temperature of daylight, dramatically improving light projection distance and overall visibility. The solid state, bulb-free design allows for durable, dependable headlights that are impervious to damage from shock and vibration.
Garmin Dash Cam 20
With the Garmin, reliable, Easy-to-use HD Driving Recorder with GPS you get a HD GPS standalone driving recorder with 2.3-inch LCD display, “Snapshot” feature allows you to take still images, even remove from vehicle to capture collision damage. An Integrated microphone records the sounds inside your vehicle. Incident Detection sensor automatically saves footage of collisions and incidents
Record in High Definition.
-
- Garmin Dash Cam 20
-
- Garmin Recordable Front Mounted Dash Cam
-
- Garmin Dash Cam 20 Installed Behind the Rearview Mirror
-
- Valentine One and Garmin Unit Installed
Garmin Dash Cam is an easy-to-use high-definition driving recorder with 2.3-inch LCD display. It records both audio and video, with GPS for detailed time and location data pinpointing exactly where and when events occurred. Mount the camera to your windshield and record your drive in 1080p, 720p or WVGA. Dash Cam records in a continuous loop, using the included 4 GB microSD™ card. To add more memory, add a larger microSD card (accepts up to 32 GB, sold separately. Class 10 required). Play back the footage on the LCD display or review later on your computer.
The camera has a wide-angle lens that captures the entire road. Its integrated microphone gives you the option of recording audio inside the vehicle.
Vizualogic Headrest Mounted Removable Tablets and Gaming
-
- Phoenix MINI Controller
-
- Phoenix One Controller
-
- Android Tablet and Gaming Controller with Bluetooth Headphones
-
- Bluetooth Headphones from Vizualogic
-
- Video Streaming in Your Car or Truck!
-
- DVD Player Too!
Vizualogic is the market leader in manufacturing Rear Seat Entertainment, providing a removable full android tablet solution to the PerfectMatch ™ headrest which matches your vehicle interior with leather, vinyl, cloth, stitch, and thread.
View more details on this product on our other page dedicated to the Android Tablet System here!
Valentine 1 Radar and Lazer Detector
Find the Direction of the Signal
What’s Included With Valentine One Radar Locator:
1. Valentine One Radar Locator
2. Windshield mount
3. Visor mount
4. Lighter adapter
5. Power cord, coiled
6. Power cord, straight
7. Spare suction cups
8. Direct-wire power adapter
9. Wiring-harness connector
10. Owner’s Manual
11. Spare fuse
With the Concealed Display:
(optional at extra cost)
1. Straight power cord, 8-foot
2. Straight power cord, 3-inch
3. Display-module backplate, for mounting
4. Dual Lock® Fasteners
With the Remote Audio Adapter:
(optional at extra cost)
1. Power cord, straight
Pioneer Sound System
-
- New Pioneer Tweeter Speakers Installed
-
- Pioneer Amplifier Installed Under Middle Row Seat
-
- Pioneer Amplifier Installed Under Middle Row Seat
-
- Custom Painted Dash, Doors and Custom Seats
A new Pioneer sound system was put in place of the original factory speakers for a cleaner, more quality sound that enhances the driving trips when playing music. Door speakers and tweeters were replaced and a new Pioneer amplifier was installed under the middle bench seat to power the quality speakers in the Hummer.
If you have interest in better sound out of your speakers, custom seats and upholstery, visual entertainment systems, gaming systems, recordable dash cameras, and anything else custom for your vehicle including boats, please call us today to talk to our experienced staff and ask about a free quote.
407-704-5676
87 W. Michigan St.
Orlando, Florida 32806
Before Pictures
-
- During Work
-
- Custom Hand Fabricated Enclosure for 6 Speakers and a LED Logo
-
- Wet Sounds Amp Number 1
-
- Wet Sounds Amp Number 1
-
- Custom “Nightmare” Airboat
We have been working with builders on this one and are excited to deliver our work to @the_bigwayne
–@wetsounds speakers and amps everywhere with @rigidindustries lights, @seadek AND more LED. You can see a video of the boat on our Next Level Facebook and Next Level Instagram.
After Pictures
-
- Custom Nightmare Airboat
-
- Next Level Worked with the Manufacture from the Beginning of the Nightmare Airboat Build
-
- WetSounds and SeaDek Installed
-
- WetSounds Rev10 Can Speaker
-
- Yeti’s and WetSounds XS-XXX 12″ Sub in Custom Made Marine Box
-
- Nightmare Airboat
-
- Seats by Buttraxx
-
- Clean Installation of Wiring
-
- WetSounds Controls
-
- SeaDek WetSounds and Seats
-
- SeaDek on Rails of Airboat
-
- SeaDek on Foot Rest
-
- Cool Patterns Available
About the 12 inch SPL Marine Subwoofer.
“The XS-XXXv2 is the one of the only SPL marine woofer in the world. Advanced acoustical engineering and high end components make the XS-XXXv2 the subwoofer of choice for those looking for extreme bass. Cutting edge computer aided design and full finite element anaylis give you a woofer built for extreme use. Weighing in at over 30 pounds! With the XS-XXXv2, not only do you get killer bass but also some additional ballast! Powder Coated gloss black cast aluminum frame, high stiffness matte black polypropylene/carbon fiber/glass fiber cone, heavy duty magnetic system, high roll santoprene thermoformed rubber surround, fiberglass former, 3″ dual voice coil, gold plated screw down binding posts, integrated multi part cooling system with t yoke heat sink and combination peripheral/pole piece venting ensures high power and low voice coil temperatures.” – WetSounds
About SeaDek
“SeaDek non-skid, closed cell EVA products offer safe and comfortable alternatives to molded in non-skid, paint-on textures and other marine traction products currently available. From UV protected non-absorbent foam, SeaDek features an innovative, textured micro-dot surface for enhanced non-slip characteristics.
Formulated with a 3M™ acrylic based high-bond pressure sensitive adhesive, SeaDek’s robust, peel-and-stick application makes it easy to install and requires no mounting of hardware. Easy to clean and stain resistant, SeaDek also provides protection for boat surfaces, especially in high traffic areas. Other benefits that SeaDek offers include:
-Exceptional traction even when wet
-Unparalleled comfort when standing, walking or leaning on boat surfaces
-Shock absorption, which decreases fatigue
-Protection for boat surfaces against scratches, chips and dents
-Noise reduction characteristics – ideal for fishermen
SeaDek can be tailored to fit a wide variety of application on just about any type of boat, including: sports & commercial fishing boats, flats boats, sailboats, ski boats, commercial marine craft, house boats, personal water craft, towboats and more. If you have a boat, you have a place for SeaDek. Additional applications for SeaDek include:
-Swim platforms and cockpit pads
-Step kits
-Helm station pads
-Poling platforms
-Coaming bolsters/pads
-Footwells
-Gunnels
-Trailers”
Contact us with any questions about this boat or to schedule a consult for your vehicles and other toys – 407-704-5676
Email us anytime [email protected]
You’ve seen promotional vehicles on the road with vinyl wraps and the companies name on it. Well take a look at this Ford Monster Truck from J.S.J Unlimited that came into our shop!
J.S.J. Unlimited Ford Monster Truck
J.S.J Unlimited is a locally owned and operated, premier landscaping service in Central Florida. Their goal is to transform your property’s exterior and provide the maintenance necessary to keep it looking its best.
This truck has one numerous truck pulls and spends most of its time playing in mud.
Getting muddy is a southern thing
The owners of the truck came to us for custom bumpers, lights and sound, powder coating, custom sound and more. The bumpers had to be custom fabricated to hold Rigid Industries Radiance lightbars and pods. We custom build the actual headlights, installed new side mirrors, and even did a custom headliner feature.
Early stage pictures below show the work we first did to the truck. See more final images at the very bottom of this post.
Before Next Level Did Work
The truck only had a few lights tied to the frame. Those were eventually removed and replaced with new lights in custom bumpers.
To give the truck the Next Level treatment, we powder coated all the blue under the truck including springs and 4link arms. We painted the side mirrors and put new clear lenses for the turn signals. We added spike caps all around the 4 links at joints. Repainted the dash white and installed with new light switches. New custom made leather seats were installed for a clean and custom look for the Ford. Three JL Audio 12″ subwoofer in a custom box with an amp were installed behind the back seat to add even more sound to truck. We also had a new steal plate on the frame etched with our name and JSJ Unlimited.
-
- First stage of work done
-
- That’s BIG!
-
- Powder coated 4 link bars
-
- Spikes on 4 link bars
-
- Blue powder coated 4 link bars
-
- Custom headlights
-
- Closer view of custom headlights
-
- Painted mirror and replaced the turn signal to a clear lens
-
- Custom box for 3 JL Audio 12″‘s
-
- Custom seats
-
- Custom seats
-
- Newly painted dash
-
- Painted Ford Super Duty Dash
-
- Custom embroidery
-
- Custom back seat
-
- Spike on 4 link
-
- Custom plate
Since these pictures featured above, we have updated the truck with even more! See video of the final work done on the Monster Truck.
We had 2 custom bumpers fabricated for the truck. The new front bumper was made to fit two 30″ Rigid Industries light bars and 4 Rigid Pod lights. The new rear bumper was made to house 4 more Pod lights. Each new Rigid Industries light comes from their Radiance series of lights that can be switched on to glow the color blue, at the same time, have the white lights controlled On or Off. A very cool feature from Rigid that we have been installing on other vehicles.
-
- Custom Bumper and Rigid Industries Lights
-
- J.S.J. Unlimited Ford Monster Truck
-
- Two 30″ light bars from Rigid Industries Installed
-
- Radiance blue light back ground On
-
- Custom bumper to fit lights
-
- Radiance blue pod’s in bumper On
-
- Bright 30″ Radiance Light Bars from Rigid Industries
-
- Powder coated springs, custom bumper, light bars and more
-
- Custom bumper to fit Rigid Industries Radiance Pod’s
-
- Custom back bumper for Pod lights and Tail Light’s painted
-
- Closer view of painted lights, and custom bumper
-
- 4 Radiance Pod lights installed in custom rear bumper
-
- Custom plate
-
- Powder coated springs and 4 link bars
-
- Custom bumper fabricated for Rigid Lights
-
- Blue powder coating
-
- Lights On!
-
- Rigid Industries Radiance Pod Lights
-
- Rear Corner View
-
- Custom light switches
-
- Inside view of custom bumper and lights
-
- Plexiglass custom head liner
-
- Light off on plexiglass logo
Notice our latest update to the Ford featured in the last two pictures above. We installed a custom illuminated headliner with the J.S.J logo in blue when switched on.
We here at Next Level Inc. take pride in our work and give all of our customers that purchase products through us, a lifetime warranty on all labor.
See the video below of the truck before the newest updates, but winning at a truck pull.
Thank you J.S.J. Unlimited for coming to our shop and letting us work on the truck!
If you have questions about this truck, J.S.J. Unlimited or how we can work on your vehicles, please call us today at 407-704-5676.
Or email us at [email protected]
J.S.J. Unlimited Ford Monster Truck
Airboats are fun! We have some boats ourselves that we have installed custom Seadek Non-Skid, waterproof speakers from Wetounds, and Ocean LED and Rigid Industry Lights just like on this customers boat. The customer here asked us to install a screaming and waterproof Wetsounds stereo so their friends can hear the music from across the state.
This airboat now has four 10″ speakers and four 8″ color changing Wetsounds speakers, a 10inch sub from Wetsounds, and 2 marine amps to power it all.
2 Rigid Industry square lights were installed around the fan cage as well as more LED lights under the gunwale and in the fan cage.
Music can now be controlled from a remote or a smart phone. Lights can also be controlled through a remote and a smart phone.
At Next Level Inc., we put pride in our work and treat every customer with a white glove treatment. We make sure that the work done is done right the first time. Call us today to talk to a professional that really knows how to understand what a customer is looking for, and how to manage the project in the right price. If you have any questions about this airboats installation, or will like to have this kind of work done to your toys, we are open Monday – Friday 9am-6pm and Saturday 9am-2pm.
87 W. Michigan St.
Orlando, Florida 32803
Rigid Industries Lights Installed
Rigid Industries Lights Installed
Wetsounds – Four 10’s and Four 8’s Installed with Wetsounds Subwoofer. All waterproof!
Custom SeaDek with Next Level and Wetsounds Logo on Waterproof Subwoofer.
Wetsounds 10″ Waterproof Speaker
Color Changing Speakers and LED Lights
Color Changing Speakers and LED Lights
Color Changing Speakers and LED Lights
Color Changing Speakers and LED Lights
Color Changing Speakers and LED Lights
Color Changing Speakers and LED Lights
Custom Design
Add Detail to Your Boat with SeaDek Non-Skid Surfacing
Add Safe Non-Skid Surface from SeaDek at Our Shop
Custom SeaDek surface
XD wheels and Nitto Tires
We set up this Jeep Rubicon Unlimited with XD wheels and Nitto Extreme tires to give this vehicle the offroad capabilities that the customer had requested. Also installed was a Pioneer 5100nex touch screen media unit with bluetooth that fit right into the dash which is paired with 2 pioneer 10’s in a custom box. The box was designed to hide the subs in a very clean and inexpensive way where the speakers are underneath the box so a person walking by cannot see them.
-
- XD Wheels and Nitto Extreme Tires
-
- Pioneer 5100 installed
-
- Custom subwoofer box that holds 2 10 inch subs
Airboats are fun! We have some boats ourselves that we have installed custom Seadek Non-Skid, waterproof speakers from Kicker, and Ocean LED lights just like on this customers boat. The customer already had Seadek installed, but has asked us to install a screaming stereo so they can hear the music from across the state.
Kicker speakers and amp were installed in a matter of a couple of hours with custom mounting brackets. Music can now be controlled from a remote or a smart phone.
Polaris 170 is a youth ATV that we did custom snorkel, lift kit, wheels and tires, light bar and sound bar.
Youth models have special age restrictions; the Polaris RZR 170 is intended for operators age 10 and older, 50-cc ATV models are intended for operators ages 6 and over, 90-cc ATV models are intended for operators ages 10 and older, and the 200-cc ATV is intended for operators age 14 and older.
We added a custom snorkel, light bar, and sound bar.
2016 Polaris Youth RZR custom snorkel, lightbar and soundbar
2016 Polaris Youth RZR Light bar, snorkel, sound bar
2016 Polaris Youth RZR with custom lift kit, wheels and tires
Our client came to us with their brand new Kubota Skid Steer and wanted to add a radio and speakers to the all ready luxurious loader. Since the cab is already inclosed we didn’t have to worry about them getting wet so we went with a pioneer radio with a charging port and bluetooth for handsfree calling. For speakers we went with Kicker PSM3 Mini enclosed speakers and mounted them in the corners of the cab. Call today and we can take care of any of your custom Audio and Visual needs 407-704-5676.
Kicker pods and Pioneer radio mounted
Pioneer Radio Installed in Kubota Skid Steer
Kicker mini pods installed in Kubota Skid Steer
