This is a Mercedes Benz CLK430.
It is a beautiful RWD, V8 convertible, now with killer stereo, working steering wheel controls, and a backup camera.
Mercedes Benz CLK430
This customer wanted a new stereo system with a backup camera. After playing with a couple of multi media units on the demo wall in our showroom, the NEX multimedia receiver from Pioneer was chosen because of how easy it is to use and how the screen integrates to a backup camera screen. We had to install the steering wheel a control adapter for the controls to work properly, a major feat for most cars, but was done successfully by our experienced staff.
-
- Pioneer NEX Multimedia Screen
-
- Pioneer NEX Multimedia Screen with Backup Camera Function
-
- Backup Camera Installed
For the new stereo system, the customer chose a MMats Pro Audio setup with new door speakers, a 10inch subwoofer in a custom box that included a 5channel amplifier and a nice trim panel in the trunk. Notice in the pictures that you can’t even see the subwoofer. That’s because of the custom panel and box that matches the car’s original carpet.
-
- Custom Subwoofer and Amp Installation
-
- Upgraded driver side speaker
-
- Upgraded passenger side speaker
-
- Next Level Inc.
-
- Mercedes-Benz V8 door step
Typically when you get a new media unit installed in your car or truck, you will most likely loose the steering wheel radio button functions. But the guys here at Next Level In. have been able to install the Pioneer NEX multimedia unit to work with the factory steering wheel controls in the CLK430.
If you have questions about this car, or will like to schedule a consultation to have any work done to your car, truck, boat, or ATV/UTV’s, please call us today at 407-704-5676.
*All customers receive a Lifetime Warranty on Labor when products are purchased through the shop.
Introducing our first sound project on an Oreion Reeper4.
Oreion Reeper4
This Reeper is a durable, comfortable seating for four with fully adjustable driver and co-pilot seats. The customer wanted a higher quality stereo than the stock one that it come from the factory with. So we set up a Fusion MS-RA70N Marine Entertainment System with Bluetooth & NMEA 2000 and two 6″ 150 watt 2-way speakers.
“Introducing the MS-RA70N, FUSIONs sleekest value-packed marine stereo, designed to deliver a quality on-water entertainment experience by incorporating some of the latest marine technologies. Engineered to seamlessly replace any standard DIN sized non-marinised stereo without the need to reconfigure dash space. Clever styling allows an installer the option of either mounting the stereo with a conventional dash finish or an option to integrate into a glass helm with a flush surface mount, ensuring a high-end installation.
UPDATE: Now with added support for FUSION-Link Lite via ANT for Garmin Smart Watch control.
Features:
•A2DP Bluetooth Audio streaming with FUSION-Link app remote control available
•AM / FM Radio Tuner with support for DAB Radio (MS-DAB100A Module and Antenna Package)
•USB MP3 Playback with support for Apple iAP2 and Android AOA music
•IPx7 Waterproof front face with optically bonded LCD
•Flush or Dash mounting installation options
•FUSION-Link NMEA 2000 Ready for connection and control from any supported Multi-Function Display
•Multi-Zone Control (2 Zone System) Works with MS-NRX200i remote control when installed on a powered network (additional cabling required)
•Stream your favorite soundtrack from any compatible device with control* available from the stereo or your connected smart phone via the FUSION-Link Bluetooth app. Simply download the free Apple® or •Android™ FUSION-Link remote control app for Bluetooth from iTunes™ or Google Play™ and enjoy localized zone control, source navigation, track selection and the freedom of wireless control.”
-Fusion.com
4″ 120 Watt 2-Way Speakers
-
- Driver Side Speaker Installed
-
- Passenger Side Speaker Installed
FUSION’s Full Range Marine Speakers are designed and engineered specifically for the marine environment. FUSION’s marine speakers include design innovations and materials that not only produce great sound, but also ensure a sustained high performance level during prolonged exposure to the marine elements.
Incorporating the latest German ‘CURV’ cone technology and titanium tweeter dome for clear, powerful sound in the harsh marine environment. ‘CURV’ technology incorporates a woven fibre composite which is heat pressed to form a lighter and stronger cone. This creates greater sound definition, higher output and greater resistance to the marine environment. Engineered to minimise magnetic interference to navigational equipment.
4″ 2-Way Speakers, 120 Watts Max Power
True Marine Protection-
Designed to withstand the harsh marine environment and comply with International ASTM Standards for UV Stability (ASTM-D4329) and Salt/Fog Resistance (ASTM-B117)
True Waterproof Design-
Complies with IP65 Waterproof and Dust Standards and features a fully sealed cross-over, magnet and tweeter housing with waterproof cone and surrounds
True Power Saving-
High efficiency design reduces battery drain
Magnetic Shielding-
When installing marine electronics, magnetic interference is something that all installers take into consideration. Understanding this, FUSION has added a Bucking Magnet at the rear of the speaker motor assembly, which reduces interference that can occur with compasses or compass-based electronics*.
–Fusion
This Reaper4 is a cool vehicle and we are sure you will more of these soon. To find your Central Florida Dealer for an Oreion, visit http://www.centralfloridareeper.com/
-
- Oreion Reeper4 at Next Level Inc.
-
- Oreion Reeper4
If you have any questions for us, or will like to schedule for your vehicle to be customized, please call us at 407-704-5676.
87 W. Michigan St. Orlando, Florida 32806
You’ve seen promotional vehicles on the road with vinyl wraps and the companies name on it. Well take a look at this Ford Monster Truck from J.S.J Unlimited that came into our shop!
J.S.J. Unlimited Ford Monster Truck
J.S.J Unlimited is a locally owned and operated, premier landscaping service in Central Florida. Their goal is to transform your property’s exterior and provide the maintenance necessary to keep it looking its best.
This truck has one numerous truck pulls and spends most of its time playing in mud.
Getting muddy is a southern thing
The owners of the truck came to us for custom bumpers, lights and sound, powder coating, custom sound and more. The bumpers had to be custom fabricated to hold Rigid Industries Radiance lightbars and pods. We custom build the actual headlights, installed new side mirrors, and even did a custom headliner feature.
Early stage pictures below show the work we first did to the truck. See more final images at the very bottom of this post.
Before Next Level Did Work
The truck only had a few lights tied to the frame. Those were eventually removed and replaced with new lights in custom bumpers.
To give the truck the Next Level treatment, we powder coated all the blue under the truck including springs and 4link arms. We painted the side mirrors and put new clear lenses for the turn signals. We added spike caps all around the 4 links at joints. Repainted the dash white and installed with new light switches. New custom made leather seats were installed for a clean and custom look for the Ford. Three JL Audio 12″ subwoofer in a custom box with an amp were installed behind the back seat to add even more sound to truck. We also had a new steal plate on the frame etched with our name and JSJ Unlimited.
-
- First stage of work done
-
- That’s BIG!
-
- Powder coated 4 link bars
-
- Spikes on 4 link bars
-
- Blue powder coated 4 link bars
-
- Custom headlights
-
- Closer view of custom headlights
-
- Painted mirror and replaced the turn signal to a clear lens
-
- Custom box for 3 JL Audio 12″‘s
-
- Custom seats
-
- Custom seats
-
- Newly painted dash
-
- Painted Ford Super Duty Dash
-
- Custom embroidery
-
- Custom back seat
-
- Spike on 4 link
-
- Custom plate
Since these pictures featured above, we have updated the truck with even more! See video of the final work done on the Monster Truck.
We had 2 custom bumpers fabricated for the truck. The new front bumper was made to fit two 30″ Rigid Industries light bars and 4 Rigid Pod lights. The new rear bumper was made to house 4 more Pod lights. Each new Rigid Industries light comes from their Radiance series of lights that can be switched on to glow the color blue, at the same time, have the white lights controlled On or Off. A very cool feature from Rigid that we have been installing on other vehicles.
-
- Custom Bumper and Rigid Industries Lights
-
- J.S.J. Unlimited Ford Monster Truck
-
- Two 30″ light bars from Rigid Industries Installed
-
- Radiance blue light back ground On
-
- Custom bumper to fit lights
-
- Radiance blue pod’s in bumper On
-
- Bright 30″ Radiance Light Bars from Rigid Industries
-
- Powder coated springs, custom bumper, light bars and more
-
- Custom bumper to fit Rigid Industries Radiance Pod’s
-
- Custom back bumper for Pod lights and Tail Light’s painted
-
- Closer view of painted lights, and custom bumper
-
- 4 Radiance Pod lights installed in custom rear bumper
-
- Custom plate
-
- Powder coated springs and 4 link bars
-
- Custom bumper fabricated for Rigid Lights
-
- Blue powder coating
-
- Lights On!
-
- Rigid Industries Radiance Pod Lights
-
- Rear Corner View
-
- Custom light switches
-
- Inside view of custom bumper and lights
-
- Plexiglass custom head liner
-
- Light off on plexiglass logo
Notice our latest update to the Ford featured in the last two pictures above. We installed a custom illuminated headliner with the J.S.J logo in blue when switched on.
We here at Next Level Inc. take pride in our work and give all of our customers that purchase products through us, a lifetime warranty on all labor.
See the video below of the truck before the newest updates, but winning at a truck pull.
Thank you J.S.J. Unlimited for coming to our shop and letting us work on the truck!
If you have questions about this truck, J.S.J. Unlimited or how we can work on your vehicles, please call us today at 407-704-5676.
Or email us at [email protected]
J.S.J. Unlimited Ford Monster Truck
When you have a quick car, you might get a speeding ticket faster than you think. We offer products like the Valentine 1 that find radar and laser signals and alert you so you can HIT THE BRAKES!
We recently did a stealth install of a V1 in this Audi RS7.
-
- Close Up of V1
-
- Stealth Installation of V1
-
- Valentine 1 from Outside
-
- Audi RS7 with Valentine 1
-
- Audi RS7 Grill
A “stealth install” means that you don’t have the annoying cord hanging in the middle of your car to a power source. This annoying hanging cord gives law enforcement something to look at and see that you have a radar detector, which in hand gives them a reason to follow you to see if you’ll speed. The stealth installation of radar and laser detectors is the best way to have your detector without being detected that you have one. Call us for more info on stealth installs 407-704-5676
Find the Direction of the Signal
Info from Valentine1
V1’s new Junk-K Fighter eliminates most mobile K-band radar false alarms.
Here’s the problem: K-band radar false alarms, which were merely nuisances back when automatic store-door openers were the most common source, have recently become major-league irritants, both in their frequency and their persistence.
What changed? A safety feature that’s becoming common on new cars, the lane-change, or blind-spot, warning systems, often use weak K-band radar to “see” other vehicles nearby.
The door-opener problem was self-limiting. It was stationary and you soon drove out of range. But you may be driving in a pack with a blind-spot system generating mobile K-band radar false alarm, and you’re stuck there for miles, not knowing which is the offending car so you don’t know which one to maneuver away from.
V1 responds. All current-production V1s have Junk-K Fighter. If your V1’s serial number ends in 1179 or higher, you already have our best solution built into your detector. It’s a software revision we call the Junk-K Fighter, created to exclude mobile sources of unthreatening K signals.
For more information visit our shop at 87 W. Michigan St. Orlando, Florida 32806
407-704-5676
[email protected]
A customer recently brought in their 2015 Regal 2800 into our shop to have new speakers, LED and SeaDek floor surface installed. We give an ultra fast turnaround on installation and the customer was very excited on how clean the installation was of all the products.
-
- Regal Boats 2800 Series
-
- Interior LED lights, SeaDek and Wet Sounds Speaker
-
- Regal Boats
-
- Rear Revo 6″ Wet Sounds Marine Speakers Installed
The 2800 model comes with The FasTrac Hull that gives you more control on the water, with up to 26% faster speeds, and at the fuel pump, with up to 30% better fuel efficiency. The boat comes with a FUSION UD750 MARINE STEREO. The Fusion radio has full integration for your smart phone, which can be enclosed in a waterproof uni-dock, and has AM/FM radio capabilities. But the original speakers weren’t enough sound for the customer. We told him that WetSounds just released the new Revo 6″and 8″ speakers and that he could choose from a complete line of grills. We added 2 amps as well to power all of the new speakers.
See our post on the Wet Sounds Revo Speakers in stock now -click here-> WetSounds Revo Speakers
-
- Fusion Radio
-
- Revo Series 6″ Speaker, SeaDek, and LED Installed
-
- Revo 6″ Speaker with XS-W-SS, Stainless Steel Grill
-
- Revo 8″ Speaker with XS-W-SS, Stainless Steel Grill
-
- Wet Sounds Marine Tower Speaker
-
- Speaker Amplifiers
-
- Hidden Marine Speaker Amplifiers
-
- Revo 6″ Speaker with XS-W-SS, Stainless Steel Grill with plastic protector still on
-
- Wet Sounds Marine Speakers Installed
-
- Revo 6″ Speaker with XS-W-SS Grill in Bow
Spec’s on the Revo line from Wet Sounds:
• 1” Titanium Tweeter for crisp, clear high frequency details
• Wet Sounds exclusive Nylas (Nylon reinforced fiberglass) high stiffness composite frame to withstand even the harshest environments
• Injection Molded Advanced Composite Mid-Bass Cone for tight bass and distortion free performance
• Wet Sounds rubber spider is the industry’s only santoprene rubber spider that is impervious to water saturation and dry rot
• Thermoformed santoprene rubber surround for permanent attachment to the cone
• 12dB audiophile crossover with air core inductors, mil spec tolerance parts and integrated tweeter protection for the highest performing marine speaker in the world
• RGB LED Tweeter Glow Kit Included allows hundreds of color options
• 8 Different Grill Options available
• More choices than the competition!Below are just a few photo’s from a recent customer who we installed REVO speakers for.
Here are more images of the SeaDek floor surface and LED around the boat.
-
- SeaDek Pad on Bow for Safe Stepping On and Off Boat
-
- SeaDek Pad on Bow for Safe Stepping On and Off Boat
-
- SeaDek Installed on Power Platform
-
- Revo Series 6″ Speaker, SeaDek, and LED Installed
-
- Close Up of SeaDek and LED Lights
-
- LED Lights and SeaDek
-
- Wet Sounds Marine Speakers Installed
-
- LED Lights Installed
-
- LED Lights Installed Along Boat
-
- Rear Revo 6″ Wet Sounds Marine Speakers Installed
-
- SeaDek and LED Installed
-
- Interior LED lights, SeaDek and Wet Sounds Speaker
-
- Safe Floor Surface and Lighting for Regal Boats and More
For more information on our fast turnaround installation of SeaDek, LED lighting, Marine Speakers, and more, please call us today! 407-704-5676
Email [email protected]
We have in stock, the new REVO Series speakers from Wet Sounds and offer a lifetime warranty on labor/installation when products are purchased at our shop.
| Wet Sounds is proud to present the newest innovation in marine speakers, the REVO Series. The series comes in two sizes, 6.5’’ and 8” models, and both are loaded with industry leading features to be the best speaker on the market. The series comes with 1” Titanium Tweeters for clear high frequency detail, Wet Sounds exclusive Nylas (Nylon reinforced fiberglass) composite frame to withstand the harshest environment. An injected molded advanced composite mid-bass cone for tight bass and distortion free performance. Each speaker comes with RGB LED tweeter glow kit that will allow thousands of color options and with 8 different grill options for both Salt and Fresh water, you can match the look and feel of your boat. |
• 1” Titanium Tweeter for crisp, clear high frequency details
• Wet Sounds exclusive Nylas (Nylon reinforced fiberglass) high stiffness composite frame to withstand even the harshest environments
• Injection Molded Advanced Composite Mid-Bass Cone for tight bass and distortion free performance
• Wet Sounds rubber spider is the industry’s only santoprene rubber spider that is impervious to water saturation and dry rot
• Thermoformed santoprene rubber surround for permanent attachment to the cone
• 12dB audiophile crossover with air core inductors, mil spec tolerance parts and integrated tweeter protection for the highest performing marine speaker in the world
• RGB LED Tweeter Glow Kit Included allows hundreds of color options
• 8 Different Grill Options available
• More choices than the competition!Below are just a few photo’s from a recent customer who we installed REVO speakers for.
-
- Regal Boat with WetSounds Audio and LED
-
- REVO 6.5″ with XS Grilles
-
- Speaker RGB to match the boats LED’s that we installed
We offer a lifetime warranty on all labor done when products are purchased through our shop.
Call us today to schedule your free estimate of WetSounds new REVO Series speakers 407-704-5676
This customer brought his stock Chevy Silverado 2500 HD to our custom shop to add hight, and a new wheel and tire setup. We installed a 3inch lift kit to the suspension that gave the truck more room from the ground and offers the look of a more impressive vehicle. We showed the customer a couple of rims for his truck and he chose a FUEL 20″ rim with Toyo A/T (All Terrain) tires. The 35″ Toyo tire and FUEL wheel combination with the trucks new lift kit made for a great looking truck. The customer was ecstatic when he the truck after the work was done! He was so excited to have the work done and was happy that we did the work right and with a quick turnaround.
-
- Next Level Customizes Trucks
-
- 3 inch Lift Kit for Chevy 2500 HD
-
- Next Level Custom Audio Chevy Trucks
-
- Fuel Rim Matte Finish
-
- Fuel Rims and Toyo A/T Tires
-
- Next Level Chevy Truck Lift Kit and Wheel Setup
If you will like to add or subtract hight, add wheels and tires, and add audio/visuals to your current vehicle, please call us today! 407-704-5676
Or stop in 9-6pm Monday-Friday and Sunday 9-2pm
87 W. Michigan St.
Orlando, Florida 32806
Stealth Installed K40 Laser Jammer
We installed a PASSPORT 9500ix radar and laser detection system and then did a “stealth installation”
PASSPORT’s twin-antenna design sets a new standard for long-range protection. This patented design is completely undetectable, making it the perfect choice for those who like to run unnoticed. All North American radar bands are covered, including “POP” radar.
VARIABLE-SPEED
RADAR PERFORMANCE
PASSPORT’s AutoSensitivity mode varies radar sensitivity based on your vehicle’s speed. The result is radar performance when needed most.
DISCREET
INSTALLATION
The PASSPORT 9500ci with all-new ShifterPro sensors provides the ultimate in discreet operation. Included sensors are mounted in the front grill area of your vehicle (rear shifters optional). Interior control module and display are separated for multiple installation options. The result is no messy cords and no unwanted attention.
LASER PROTECTION
LIKE NO OTHER
Our all-new laser “Shifters” provide 360 degree protection (with optional rear shifters), including the latest “double-pulse” laser guns. Multiple sensors positioned front or rear can be programmed to “Shift” for maximum protection. “Shifting” may not be legal in your area. Check local laws before activating.
PASSPORT 9500ci is compatible with ESCORT Live, the award-winning app and exclusive real-time ticket-protection network, which warns you of upcoming alerts received and reported by other users in the area, and gives you access to local speed limit data for over-speed alerts.
For more details on protecting your car from police radar and laser speed trap guns, please call us today!
407-704-5676
or email us at [email protected]
Toyota 4Runner 5G Roof Rack and Light Bar Installed
The GOBI Stealth Rack is the low profile answer to your roof rack needs. GOBI Stealth Racks allow you to fit your vehicle in the garage and through the car wash. The style of the vehicle is matched by custom fitting each rack to the model of the vehicle it is ordered for. GOBI provides you with the strongest Rack in the market without requiring drilling or modifications to your vehicle. This roof rack is built strong with style, while still allowing you to have full functionality. The rack is built out of 1″ heavy gauge tubing, surrounding the easily accessible and traversible 15.63 sq.ft. (1.45m2) expanded metal deck. The Stealth Rack also comes standard with a wind deflector and built in cross bars that are compatible with the wide range of Thule and Yakima accessories as well as roof top tents! The only decision you need to make is where your next adventure will begin.
Roof Rack w/ Ladder
40″ Rigid Industries LED Light Bar Accessory
For more information on Gobi Roof Racks and Rigid Industries LED Light Bars or other customization to your vehicles, please call us today!
407-704-5676
or email us at [email protected]
Repair and custom embroidery of bolster upholstery, 6mm teak SeaDek through entire boat, and 20mm Helm Pad with Everglades custom etching.
The upholstery around the gunwale of the boat was torn and needed to be replaced. We went the extra step and made sure that the Everglades name was presented as it was when the boat was brand new. The customer was very happy with our work and was very excited to put it in the water for a fun year ahead.
Durable and shock absorbent, SeaDek provides not only an exceptional traction surface but also lessens the fatigue brought on by prolonged standing and working on hard decking and platforms. SeaDek also protects your deck from scratching, chipping and dents. Fishermen will appreciate SeaDek’s noise reducing qualities.
SeaDek is manufactured in the United States from nonabsorbent, closed cell EVA material specifically formulated for marine applications. Sports & commercial fishing, flats boats, sailboats, ski boats, commercial marine, house boat, personal water craft, platforms and steps are just a few of the unlimited applications for SeaDek Non-Skid Marine Traction. SeaDek’s marine grade 3M™ pressure sensitive adhesive backing makes application a breeze. Just measure, cut, peel and stick. It’s that easy! Your boat deserves SeaDek!
We here at Next Level Inc. do free estimates of SeaDek and fast turnaround installation. Please call us today to talk about your boat, truck or car. 407-704-5676
-
- Everglades Boat
-
- Everglades Boat
-
- Custom SeaDek
-
- Custom Bulster Repair
-
- Custom Etching on SeaDek
-
- 20mm Helm Pad
-
- Custom Bulster Embroidery
-
- 6mm Teak Color SeaDek Floor Padding
-
- SeaDek
